There’s no stopping to the vibe that could only be brought by the summer heat. This is where we bask ourselves in the sunny outdoors and not worry on any chilly air that might ruin the fun. Although summertime can be a lot of fun, it can also entail garden responsibilities to your homeowner. This includes your lush lawn. It is inherent of you as a homeowner to install a sprinkler system. Experts say that good sprinkler installation can save lawn water usage from 30 to 70 percent. This can truly benefit the environment and your pocket. You might have some reservations whether or not you’ll put up one as you do not know important matters to remember.

The goal of this article is to help you answer some of your questions about sprinkler installation. Also, this article will help you realize the importance of good preparation and planning. It will aid in smooth installation. Preparation and planning include familiarizing irrigation system, the design concept, and its components.

Sketch your property

This is the first step in sprinkler installation. Make sure to do appropriate measurements for this sketch as you are to implement a system. Include tangible parts like trees, shrubs, and all hardscapes. On the sketch, do partitions and identify each as letter A to D.

Determine system design capacity

Keep the sketch and proceed to system design capacity. System design capacity is important as it will be the key to efficiency. It involves a water pressure gauge, faucet, and water meter. Measurements such as static water pressure and water volume are also needed to create a chart. The chart will help determine system design capacity of your sprinkler installation. Such technicalities are best consulted with a professional sprinkler installer.

Plot the sprinkler heads

Use your sketch to identify where you’ll place the sprinkler heads. There are specific types of heads for different areas. Be sure to use the appropriate one for each area. This is part of a good sprinkler system, and such a system will keep your lawn lush for years to come. It will also save you money as it is our best interest to save water consumption as much as possible.

Installation time

Sketching the property, determining system design capacity (with the help of a professional), and plot the sprinkler heads have to lead us to this phase. Use the property/lawn sketch to mark the areas where you intend to place the sprinkler heads. Next is to map out piping all throughout the lawn with string or ground marking paint. Hard labor shall be done by the professionals to start the technicalities of the installation like plumbing hookups. Professionals will pull the strings to make everything work. They will make sure that there’ll be no leaks in this system.

Also, if you’re the type of person who is conscious of timelines, sprinkler installers can give you estimates on their system design capacity deliverables. Be sure to inquire about the types of products to be used and their corresponding warranties.